Information Center
Prime Process Safety Center
Request a Quote
  • Home
  • About
    • Our Approach
    • Our Mission
    • Our Team
    • Who We Are
    • Press Room
    • Careers
  • Consulting
    • Dust Hazard Analysis (DHA) and Combustible Dust Testing
    • Ignition Sources Assessment
    • Electrostatic Hazard Assessment
    • Hazardous Area Classification
    • Process Hazard Analysis (PHA)
      • Hazard and Operability Studies (HAZOP)
      • Layer of protection analysis (LOPA)
      • Facilitation and Scribing Personnel
      • What-If and Checklist Reviews
      • Hazard Identification Reviews
      • Root Cause Analysis (RCA)
      • Fault Tree Analysis (FTA)
      • Bow-Tie Analysis
      • Quantitative Risk Assessment (QRA)
      • Consequence Modeling
    • Fire and Explosion Hazard Analysis
    • Explosion Prevention and Protection Consulting Services
    • Fire and Building Code Services
    • Process Safety Management (PSM)
    • Process Safety Management (PSM) Gap Analysis
    • Process Safety Management Compliance Review and Audit
    • Hazard Identification and Risk Assessment (HIRA)
    • Preliminary Hazard Asessment
    • Incident investigation
    • Expert Witness and Litigation
    • Facility Sitting
    • Organizational Competency in Process Safety
  • Testing Services
    • Dust Explosion/Fire Testing
      • Go/No Go Explosibility Screening
      • Burn Rate / Fire Train Test
      • Dangerous When Wet Test
      • Dust Explosion Severity (Kst/Pmax/dP/dt)
      • Minimum Explosible Concentration (MEC) / Lower Explosive Limit (LEL)
      • Limiting Oxygen Concentration (LOC) Test
      • Minimum Ignition Energy (MIE)
      • Minimum Autoignition Temperature-Cloud (MAIT - Cloud)
      • Layer Ignition Temperature of Dust (LIT)
      • Particle Sieve Analysis
      • Moisture Content Analysis
      • Cryogenic Grinding
    • Electrostatics Testing
      • Volume Resistivity
      • Surface Resistivity
      • Charge Decay (Relaxation) Time
      • Electrostatic Discharge (ESD) Testing
      • Breakdown Voltage
      • Liquid Conductivity
      • Flexible Intermediate Bulk Containers (FIBC)
      • Electrostatic Chargeability Testing
    • Self-Heating / Thermal Instability Testing
      • Basket Self-Heating
      • Grewer Oven Test
      • Air Over layer/Powder Layer Test
      • Bulk Powder Test
      • Aerated Powder Test
    • Gas & Vapor Flammability Testing
      • Flash Point
      • Flammability Limits (LFL/UFL)
      • Autoignition Temperature (AIT)
      • Limiting Oxygen Concentration (LOC)
      • Explosion Severity (Pmax and Kg)
    • UN / DOT Testing & Classification
      • Oxidizing Solids - Un Test N.1
      • Self-Heating Solids – Un Test N.4
      • Readily Combustible Solids or Flammability of Solids (Burning Rate) - Un Test N.1
      • Flammable Liquid (Flashpoint, fire point) UN Class 3
    • Reactive Chemical Testing
      • Differential Scanning Calorimeter (DSC)
      • Differential Thermal Analysis (DTA)
      • Thermogravimetric Analysis (TGA)
      • Accelerating Rate Calorimeter (ARC)
      • Reaction Calorimetry
      • Vent Sizing Package (VSP)
    • Safety Data Sheet (SDS) Creation
      • Flammability Limits
      • Boiling Point
      • Melting Point
      • Vapor Pressure
      • pH
      • Relative Density
      • Apparent Bulk Density
      • Dust Explosibility (Kst, MEC, MIE, etc.)
    • Testing Capabilities
  • Reactive Chemical Services
    • Reactive Chemical Testing Services
      • Differential Scanning Calorimeter (DSC)
      • Differential Thermal Analysis (DTA)
      • Thermogravimetric Analysis (TGA)
      • Accelerating Rate Calorimeter (ARC)
      • Reaction Calorimetry
      • Vent Sizing Package (VSP)
    • Chemical Reaction Hazard Assessment
    • Calorimetric Studies
    • Chemical Compatibility Studies
    • Chemical Instability
    • Chemical Kinetics Evaluation
    • Process Dynamic Simulation
    • Self-Heating Evaluation and Analysis
    • Emergency Relief System Design
    • DIERS Technology for Two-Phase Relief System Design
    • Emergency Relief Effluent Handling System Design
  • Training
    • Private or In house Training
    • Process Safety Webinars
    • Training Course Registration
    • Competency Core Areas
      • Combustible Dust Hazard Training
      • Electrostatic hazard training
      • Process Hazard Analysis (PHA) training
      • Flammable and Combustible Liquid Hazard Training
      • Hazardous Area Classification Training
      • Leadership Development in Process Safety Training
      • Process Safety Training
      • Reactive Chemical Training
      • Hazard and Operability (HAZOP) Training
      • Relief System Design Training
      • Process Safety Mentoring and Support Programs Training
      • Process Safety Competency Development Training
  • Industries We Serve
    • Automotive & Aviation Industries
    • Chemical Industry
    • Coal and Mining Industry
    • Electronics Industry
    • Energy / Power Industry
    • Engineering Industry
    • Equipment Manufacturing
    • Flavor & Fragrance Industry
    • Food & Beverage Industry
    • Government Agencies
    • Legal and Insurance
    • Metals & Machining Industry
    • Personal & Household Products Industry
    • Petrochemical Industry
    • Pharmaceutical Industry
    • Plastics, Resins, and Rubber Industry
    • Pulp & Paper Industry
    • Transportation Industry
    • Wood Industry
  • Downloads / Resources
    • Cases in the news
    • Press Release
    • Newsletter
    • FAQ
    • Webinars
    • News and Events
    • Videos
  • Codes & Standards
    • ASTM Tests & Standards
    • NFPA Standards and Guidelines
    • OSHA PSM Standards
    • OSHA National Emphasis Program (NEP): Directive-CPL 03-00-008
    • API (American Petroleum Institute) Standards
    • ATEX, EN, and IEC Standards
    • GB Standards (Chinese Standards)
  • Blogs / Articles
Menu
Prime Process Safety Center

primeprocesssafety

Home » Archive by Category "primeprocesssafety"
blog 3
23 Aug
primeprocesssafety

UNDERSTANDING ELECTROSTATIC DISCHARGE TESTING

  • September 12, 2024
  • By author-avatar admin_primeprocesssafety
  • 0 comments
Electrostatic testing is a critical process in various industries, particularly those dealing with flammable materials, powders, gases,...

Continue reading

bolg 2
23 Aug
primeprocesssafety

Unmasking the Hidden Dangers: Reactive Chemical Hazards in Batch Reactions

  • September 12, 2024
  • By author-avatar admin_primeprocesssafety
  • 0 comments
In the world of chemical manufacturing, batch reactions are a cornerstone of production. They offer flexibility, control, and the abili...

Continue reading

blog 1
23 Aug
primeprocesssafety

COMBUSTIBLE DUST HAZARDS IN COAL HANDLING FACILITIES

  • November 12, 2024
  • By author-avatar admin_primeprocesssafety
  • 0 comments
Coal handling facilities, including coal mines, processing plants, and power generation facilities, play a crucial role in the energy s...

Continue reading

Picture9
24 Jul
primeprocesssafety

Understanding Vent Sizing: The Essential Differences for Deflagration and Runaway Reactions

  • September 12, 2024
  • By author-avatar admin_primeprocesssafety
  • 0 comments
Introduction Chemical processes in industrial settings come with inherent risks, particularly when dealing with reactive chemicals. ...

Continue reading

Picture1
24 Jul
primeprocesssafety

COMBUSTIBLE DUST HOUSEKEEPING PROGRAM IN THE PROCESS INDUSTRIES

  • November 12, 2024
  • By author-avatar admin_primeprocesssafety
  • 0 comments
BACKGROUND OF HOUSEKEEPING Maintaining good housekeeping in facilities handling or processing combustible dust is crucial. Over the ...

Continue reading

Picture4
09 Jul
primeprocesssafety

Understanding Hazardous Area Classifications

  • July 10, 2024
  • By author-avatar admin_primeprocesssafety
  • 0 comments
Introduction A Hazardous Area Classification (HAC) study is an essential analysis aimed at reducing the chances of igniting flammabl...

Continue reading

blogs 2
09 Jul
primeprocesssafety

Understanding Combustible Dust Hazards Associated with 3D Printing c

  • July 9, 2024
  • By author-avatar admin_primeprocesssafety
  • 0 comments
Introduction The 3D printing industry, also known as additive manufacturing, has significantly impacted various sectors, including ...

Continue reading

blog
09 Jul
primeprocesssafety

Understanding Combustible Dust Hazards in Wood Processing Facilities

  • July 9, 2024
  • By author-avatar admin_primeprocesssafety
  • 0 comments
Wood processing facilities, encompassing activities such as sawing, sanding, planing, and grinding, play a crucial role in industries r...

Continue reading

fg
19 Jun
primeprocesssafety

Understanding Combustible Dust Hazards in the Metal Processing Industries

  • June 20, 2024
  • By author-avatar admin_primeprocesssafety
  • 0 comments
Introduction The metal industry encompasses a wide range of processes involving the handling, processing, and fabrication of various m...

Continue reading

dsa
19 Jun
primeprocesssafety

The Most Frequently Asked Questions About Reactive Chemical Testing

  • October 17, 2024
  • By author-avatar admin_primeprocesssafety
  • 0 comments
Why the need to test your reactive chemicals? Reactive chemical testing services play a vital role in process safety for industrial ...

Continue reading

  • 1
  • 2
Contact Us
Request a Quote
Ask Questions About Our Services
email 4

Newsletter And Get Updates

Sign up for our newsletter to get up-to-date from us

WH US 06102023 5163516042 2

Prime Process Safety Center meets expertise, prioritizing your well-being and the safety of your operations, unleashing the power of process safety

Quick Links

  • Home
  • About
  • Careers
  • Contact Us

Useful Links

  • Consulting
  • Testing Services
  • Reactive Chemical Testing
  • Training
  • Industries We Serve
  • Downloads / Resources
  • Blogs / Articles

Our Location

  • 12925 Cypress North Houston Rd,
    Cypress, TX 77429
  • +1 (346) 462-3838
  • info@primeprocesssafety.com
Copyright 2024 Prime Process Safety Center - All Rights Reserved.

Privacy Policy | Terms & Conditions

Designed & Developed by WebsHusky

  • Home
  • About
    • Our Approach
    • Our Mission
    • Our Team
    • Who We Are
    • Press Room
    • Careers
  • Consulting
    • Dust Hazard Analysis (DHA) and Combustible Dust Testing
    • Ignition Sources Assessment
    • Electrostatic Hazard Assessment
    • Hazardous Area Classification
    • Process Hazard Analysis (PHA)
      • Hazard and Operability Studies (HAZOP)
      • Layer of protection analysis (LOPA)
      • Facilitation and Scribing Personnel
      • What-If and Checklist Reviews
      • Hazard Identification Reviews
      • Root Cause Analysis (RCA)
      • Fault Tree Analysis (FTA)
      • Bow-Tie Analysis
      • Quantitative Risk Assessment (QRA)
      • Consequence Modeling
    • Fire and Explosion Hazard Analysis
    • Explosion Prevention and Protection Consulting Services
    • Fire and Building Code Services
    • Process Safety Management (PSM)
    • Process Safety Management (PSM) Gap Analysis
    • Process Safety Management Compliance Review and Audit
    • Hazard Identification and Risk Assessment (HIRA)
    • Preliminary Hazard Asessment
    • Incident investigation
    • Expert Witness and Litigation
    • Facility Sitting
    • Organizational Competency in Process Safety
  • Testing Services
    • Dust Explosion/Fire Testing
      • Go/No Go Explosibility Screening
      • Burn Rate / Fire Train Test
      • Dangerous When Wet Test
      • Dust Explosion Severity (Kst/Pmax/dP/dt)
      • Minimum Explosible Concentration (MEC) / Lower Explosive Limit (LEL)
      • Limiting Oxygen Concentration (LOC) Test
      • Minimum Ignition Energy (MIE)
      • Minimum Autoignition Temperature-Cloud (MAIT – Cloud)
      • Layer Ignition Temperature of Dust (LIT)
      • Particle Sieve Analysis
      • Moisture Content Analysis
      • Cryogenic Grinding
    • Electrostatics Testing
      • Volume Resistivity
      • Surface Resistivity
      • Charge Decay (Relaxation) Time
      • Electrostatic Discharge (ESD) Testing
      • Breakdown Voltage
      • Liquid Conductivity
      • Flexible Intermediate Bulk Containers (FIBC)
      • Electrostatic Chargeability Testing
    • Self-Heating / Thermal Instability Testing
      • Basket Self-Heating
      • Grewer Oven Test
      • Air Over layer/Powder Layer Test
      • Bulk Powder Test
      • Aerated Powder Test
    • Gas & Vapor Flammability Testing
      • Flash Point
      • Flammability Limits (LFL/UFL)
      • Autoignition Temperature (AIT)
      • Limiting Oxygen Concentration (LOC)
      • Explosion Severity (Pmax and Kg)
    • UN / DOT Testing & Classification
      • Oxidizing Solids – Un Test N.1
      • Self-Heating Solids – Un Test N.4
      • Readily Combustible Solids or Flammability of Solids (Burning Rate) – Un Test N.1
      • Flammable Liquid (Flashpoint, fire point) UN Class 3
    • Reactive Chemical Testing
      • Differential Scanning Calorimeter (DSC)
      • Differential Thermal Analysis (DTA)
      • Thermogravimetric Analysis (TGA)
      • Accelerating Rate Calorimeter (ARC)
      • Reaction Calorimetry
      • Vent Sizing Package (VSP)
    • Safety Data Sheet (SDS) Creation
      • Flammability Limits
      • Boiling Point
      • Melting Point
      • Vapor Pressure
      • pH
      • Relative Density
      • Apparent Bulk Density
      • Dust Explosibility (Kst, MEC, MIE, etc.)
    • Testing Capabilities
  • Reactive Chemical Services
    • Reactive Chemical Testing Services
      • Differential Scanning Calorimeter (DSC)
      • Differential Thermal Analysis (DTA)
      • Thermogravimetric Analysis (TGA)
      • Accelerating Rate Calorimeter (ARC)
      • Reaction Calorimetry
      • Vent Sizing Package (VSP)
    • Chemical Reaction Hazard Assessment
    • Calorimetric Studies
    • Chemical Compatibility Studies
    • Chemical Instability
    • Chemical Kinetics Evaluation
    • Process Dynamic Simulation
    • Self-Heating Evaluation and Analysis
    • Emergency Relief System Design
    • DIERS Technology for Two-Phase Relief System Design
    • Emergency Relief Effluent Handling System Design
  • Training
    • Private or In house Training
    • Process Safety Webinars
    • Training Course Registration
    • Competency Core Areas
      • Combustible Dust Hazard Training
      • Electrostatic hazard training
      • Process Hazard Analysis (PHA) training
      • Flammable and Combustible Liquid Hazard Training
      • Hazardous Area Classification Training
      • Leadership Development in Process Safety Training
      • Process Safety Training
      • Reactive Chemical Training
      • Hazard and Operability (HAZOP) Training
      • Relief System Design Training
      • Process Safety Mentoring and Support Programs Training
      • Process Safety Competency Development Training
  • Industries We Serve
    • Automotive & Aviation Industries
    • Chemical Industry
    • Coal and Mining Industry
    • Electronics Industry
    • Energy / Power Industry
    • Engineering Industry
    • Equipment Manufacturing
    • Flavor & Fragrance Industry
    • Food & Beverage Industry
    • Government Agencies
    • Legal and Insurance
    • Metals & Machining Industry
    • Personal & Household Products Industry
    • Petrochemical Industry
    • Pharmaceutical Industry
    • Plastics, Resins, and Rubber Industry
    • Pulp & Paper Industry
    • Transportation Industry
    • Wood Industry
  • Downloads / Resources
    • Cases in the news
    • Press Release
    • Newsletter
    • FAQ
    • Webinars
    • News and Events
    • Videos
  • Codes & Standards
    • ASTM Tests & Standards
    • NFPA Standards and Guidelines
    • OSHA PSM Standards
    • OSHA National Emphasis Program (NEP): Directive-CPL 03-00-008
    • API (American Petroleum Institute) Standards
    • ATEX, EN, and IEC Standards
    • GB Standards (Chinese Standards)
  • Blogs / Articles
asdfdasfdasf
Contact Us
Free Consultation
Close