WH US 06102023 51635160424 Prime PSC 01
Request a Quote
  • Home
  • About Us
    • Our Approach
    • Our Mission
    • Our Team
    • Who We Are
    • Press Room
    • Prime Process Safety Career
  • Consulting Services
    • Dust Hazard Analysis (DHA)
    • Ignition Sources Assessment
    • Electrostatic Hazard Assessment
    • Hazardous Area Classification
    • Process Hazard Analysis (PHA)
      • Hazard and Operability Studies (HAZOP)
      • Layer of protection analysis (LOPA)
      • Facilitation and Scribing Personnel
      • What-If and Checklist Reviews
      • Hazard Identification Reviews
      • Root Cause Analysis (RCA)
      • Fault Tree Analysis (FTA)
      • Bow-Tie Analysis
      • Quantitative Risk Assessment (QRA)
      • Consequence Modeling In Chemical Industries
    • Fire and Explosion Hazard Analysis
    • Explosion Prevention and Protection Consulting Services
    • Fire and Building Code Services
    • Process Safety Management (PSM)
    • Process Safety Management (PSM) Gap Analysis
    • Process Safety Management Compliance Review and Audit
    • Hazard Identification and Risk Assessment (HIRA)
    • Preliminary Hazard Asessment
    • Incident investigation
    • Expert Witness and Litigation
    • Facility Siting in Chemical Industry
    • Organizational Competency in Process Safety
  • Testing Services
    • ISO/IEC 17025:2017 Accredited Laboratory
    • Combustible Dust Testing
      • Go/No-Go Explosibility Screening
      • Burning Rate Test
      • Dust Explosion Severity (Kst/Pmax/dP/dt)
      • Minimum Explosible Concentration (MEC) Testing
      • Limiting Oxygen Concentration (LOC) Test
      • Minimum Ignition Energy (MIE) Testing
      • Minimum Autoignition Temperature-Cloud (MAIT - Cloud)
      • Layer Ignition Temperature of Dust (LIT)
      • Particle Sieve Analysis
      • Moisture Content Analysis
      • Cryogenic Grinding
    • Electrostatics Testing
      • Volume Resistivity
      • Surface Resistivity
      • Charge Decay (Relaxation) Time
      • Electrostatic Discharge (ESD) Testing
      • Liquid Conductivity
      • Flexible Intermediate Bulk Containers (FIBC)
      • Electrostatic Chargeability Testing
    • Breakdown Voltage
    • Self-Heating / Thermal Instability Testing
      • Basket Self-Heating
      • Grewer Oven Test
      • Air Over layer/Powder Layer Test
      • Bulk Powder Test
      • Aerated Powder Test
    • Gas & Vapor Flammability Testing
      • Flash Point
      • Flammability Limits (LFL/UFL)
      • Autoignition Temperature (AIT)
      • Limiting Oxygen Concentration (LOC)
      • Explosion Severity (Pmax and Kg)
    • UN / DOT Testing & Classification
      • Water Reactivity Testing – UN Class 4
      • Oxidizing Solids - UN Test O.1
      • Self-Heating Solids – UN Test N.4
      • Readily Combustible Solids or Flammability of Solids (Burning Rate) - UN Test N.1
      • Flammable Liquid (Flashpoint, Fire Point) - UN Class 3
    • Reactive Chemical Testing
      • Differential Scanning Calorimetry (DSC)
      • Differential Thermal Analysis (DTA)
      • Thermogravimetric Analysis (TGA)
      • Accelerating Rate Calorimetry (ARC)
      • Reaction Calorimetry
      • Vent Sizing Package (VSP)
    • Safety Data Sheet (SDS) Creation
      • Flammability Limits
      • Boiling Point
      • Melting Point
      • Vapor Pressure
      • pH
      • Relative Density
      • Apparent Bulk Density
      • Dust Explosibility (Kst, MEC, MIE, etc.)
    • Testing Capabilities
  • Reactive Chemical Services
    • Reactive Chemical Testing Services
      • Differential Scanning Calorimetry (DSC)
      • Differential Thermal Analysis (DTA)
      • Thermogravimetric Analysis (TGA)
      • Accelerating Rate Calorimetry (ARC)
      • Reaction Calorimetry
      • Vent Sizing Package (VSP)
    • Chemical Reaction Hazard Assessment
    • Calorimetric Studies
    • Chemical Compatibility Studies
    • Chemical Instability
    • Chemical Kinetics Evaluation
    • Process Dynamic Simulation
    • Self-Heating Evaluation and Analysis
    • Emergency Relief System Design
    • DIERS Technology for Two-Phase Relief System Design
    • Emergency Relief Effluent Handling System Design
  • Training
    • Private or In-house Training
    • Process Safety Webinars
    • Training Course Registration
    • Process Safety Training Area
      • Combustible Dust Hazard Training
      • Electrostatic Hazard Training
      • Process Hazard Analysis (PHA) training
      • Flammable and Combustible Liquid Hazard training
      • Hazardous Area Classification Training
      • Leadership Development in Process Safety Training
      • Process Safety Training
      • Reactive Chemical Training
      • Hazard and Operability (HAZOP) Training
      • Relief System Design Training
      • Process Safety Mentoring and Support Programs Training
      • Process Safety Competency Development Training
  • Industries We Serve
    • Automotive & Aviation Industries
    • Chemical Industry
    • Coal and Mining Industry
    • Electronics Industry
    • Energy / Power Industry
    • Engineering Industry
    • Equipment Manufacturing
    • Flavor & Fragrance Industry
    • Food & Beverage Industry
    • Government Agencies
    • Legal and Insurance
    • Metals & Machining Industry
    • Personal & Household Products Industry
    • Petrochemical Industry
    • Pharmaceutical Industry
    • Plastics, Resins, and Rubber Industry
    • Pulp & Paper Industry
    • Transportation Industry
    • Wood Industry
  • Resources
    • Cases in the news
    • Press Release
    • Newsletter
    • FAQ
    • Webinars
    • News and Events
    • Videos
  • Codes & Standards
    • ASTM Tests & Standards
    • NFPA Standards and Guidelines
    • OSHA PSM Standards
    • OSHA National Emphasis Program (NEP): Directive-CPL 03-00-008
    • API (American Petroleum Institute) Standards
    • ATEX, EN, and IEC Standards
    • GB Standards (Chinese Standards)
  • Blogs
Menu
Prime Process Safety Center
Request a Quote

Tag Archives: Incident Investigation

Home · Incident Investigation
Webinar: 5 Myths and Misunderstandings in Thermal and Chemical Reactivity Hazards Banner
26 Jun
Webinar

Webinar: 5 Myths and Misunderstandings in Thermal and Chemical Reactivity Hazards

  • July 28, 2025
  • By author-avatar Lily
  • 0 comments

Free webinar: Learn 5 common myths and understandings about reactivity hazards with expert insights from Dr. Guibing Zhao.

Continue reading

psm img
29 May
Consulting Services

The Most Frequently Asked Questions About Process Safety Management (PSM)

  • June 17, 2025
  • By author-avatar admin_primeprocesssafety
  • 4 comments
What is Process Safety Management (PSM)? PSM is a regulatory framework designed to prevent the release of hazardous chemicals that could...

Continue reading

Sign up for newsletter and updates

This field is for validation purposes and should be left unchanged.

Home
About Us
Our Team
Career
Privacy Policy
Terms & Conditions
Consulting Services
Testing Services
Reactive Chemical Testing
Training
Industries We Serve
Resources
Codes & Standards
Blogs
Contact Us
12925 Cypress North Houston Rd, Cypress, TX 77429
(346) 462-3838
(346) 462-3816
info@primeprocesssafety.com
Copyright 2025 Prime Process Safety Center - All Rights Reserved
  • Home
  • About Us
    • Our Approach
    • Our Mission
    • Our Team
    • Who We Are
    • Press Room
    • Prime Process Safety Career
  • Consulting Services
    • Dust Hazard Analysis (DHA)
    • Ignition Sources Assessment
    • Electrostatic Hazard Assessment
    • Hazardous Area Classification
    • Process Hazard Analysis (PHA)
      • Hazard and Operability Studies (HAZOP)
      • Layer of protection analysis (LOPA)
      • Facilitation and Scribing Personnel
      • What-If and Checklist Reviews
      • Hazard Identification Reviews
      • Root Cause Analysis (RCA)
      • Fault Tree Analysis (FTA)
      • Bow-Tie Analysis
      • Quantitative Risk Assessment (QRA)
      • Consequence Modeling In Chemical Industries
    • Fire and Explosion Hazard Analysis
    • Explosion Prevention and Protection Consulting Services
    • Fire and Building Code Services
    • Process Safety Management (PSM)
    • Process Safety Management (PSM) Gap Analysis
    • Process Safety Management Compliance Review and Audit
    • Hazard Identification and Risk Assessment (HIRA)
    • Preliminary Hazard Asessment
    • Incident investigation
    • Expert Witness and Litigation
    • Facility Siting in Chemical Industry
    • Organizational Competency in Process Safety
  • Testing Services
    • ISO/IEC 17025:2017 Accredited Laboratory
    • Combustible Dust Testing
      • Go/No-Go Explosibility Screening
      • Burning Rate Test
      • Dust Explosion Severity (Kst/Pmax/dP/dt)
      • Minimum Explosible Concentration (MEC) Testing
      • Limiting Oxygen Concentration (LOC) Test
      • Minimum Ignition Energy (MIE) Testing
      • Minimum Autoignition Temperature-Cloud (MAIT – Cloud)
      • Layer Ignition Temperature of Dust (LIT)
      • Particle Sieve Analysis
      • Moisture Content Analysis
      • Cryogenic Grinding
    • Electrostatics Testing
      • Volume Resistivity
      • Surface Resistivity
      • Charge Decay (Relaxation) Time
      • Electrostatic Discharge (ESD) Testing
      • Liquid Conductivity
      • Flexible Intermediate Bulk Containers (FIBC)
      • Electrostatic Chargeability Testing
    • Breakdown Voltage
    • Self-Heating / Thermal Instability Testing
      • Basket Self-Heating
      • Grewer Oven Test
      • Air Over layer/Powder Layer Test
      • Bulk Powder Test
      • Aerated Powder Test
    • Gas & Vapor Flammability Testing
      • Flash Point
      • Flammability Limits (LFL/UFL)
      • Autoignition Temperature (AIT)
      • Limiting Oxygen Concentration (LOC)
      • Explosion Severity (Pmax and Kg)
    • UN / DOT Testing & Classification
      • Water Reactivity Testing – UN Class 4
      • Oxidizing Solids – UN Test O.1
      • Self-Heating Solids – UN Test N.4
      • Readily Combustible Solids or Flammability of Solids (Burning Rate) – UN Test N.1
      • Flammable Liquid (Flashpoint, Fire Point) – UN Class 3
    • Reactive Chemical Testing
      • Differential Scanning Calorimetry (DSC)
      • Differential Thermal Analysis (DTA)
      • Thermogravimetric Analysis (TGA)
      • Accelerating Rate Calorimetry (ARC)
      • Reaction Calorimetry
      • Vent Sizing Package (VSP)
    • Safety Data Sheet (SDS) Creation
      • Flammability Limits
      • Boiling Point
      • Melting Point
      • Vapor Pressure
      • pH
      • Relative Density
      • Apparent Bulk Density
      • Dust Explosibility (Kst, MEC, MIE, etc.)
    • Testing Capabilities
  • Reactive Chemical Services
    • Reactive Chemical Testing Services
      • Differential Scanning Calorimetry (DSC)
      • Differential Thermal Analysis (DTA)
      • Thermogravimetric Analysis (TGA)
      • Accelerating Rate Calorimetry (ARC)
      • Reaction Calorimetry
      • Vent Sizing Package (VSP)
    • Chemical Reaction Hazard Assessment
    • Calorimetric Studies
    • Chemical Compatibility Studies
    • Chemical Instability
    • Chemical Kinetics Evaluation
    • Process Dynamic Simulation
    • Self-Heating Evaluation and Analysis
    • Emergency Relief System Design
    • DIERS Technology for Two-Phase Relief System Design
    • Emergency Relief Effluent Handling System Design
  • Training
    • Private or In-house Training
    • Process Safety Webinars
    • Training Course Registration
    • Process Safety Training Area
      • Combustible Dust Hazard Training
      • Electrostatic Hazard Training
      • Process Hazard Analysis (PHA) training
      • Flammable and Combustible Liquid Hazard training
      • Hazardous Area Classification Training
      • Leadership Development in Process Safety Training
      • Process Safety Training
      • Reactive Chemical Training
      • Hazard and Operability (HAZOP) Training
      • Relief System Design Training
      • Process Safety Mentoring and Support Programs Training
      • Process Safety Competency Development Training
  • Industries We Serve
    • Automotive & Aviation Industries
    • Chemical Industry
    • Coal and Mining Industry
    • Electronics Industry
    • Energy / Power Industry
    • Engineering Industry
    • Equipment Manufacturing
    • Flavor & Fragrance Industry
    • Food & Beverage Industry
    • Government Agencies
    • Legal and Insurance
    • Metals & Machining Industry
    • Personal & Household Products Industry
    • Petrochemical Industry
    • Pharmaceutical Industry
    • Plastics, Resins, and Rubber Industry
    • Pulp & Paper Industry
    • Transportation Industry
    • Wood Industry
  • Resources
    • Cases in the news
    • Press Release
    • Newsletter
    • FAQ
    • Webinars
    • News and Events
    • Videos
  • Codes & Standards
    • ASTM Tests & Standards
    • NFPA Standards and Guidelines
    • OSHA PSM Standards
    • OSHA National Emphasis Program (NEP): Directive-CPL 03-00-008
    • API (American Petroleum Institute) Standards
    • ATEX, EN, and IEC Standards
    • GB Standards (Chinese Standards)
  • Blogs