WH US 06102023 51635160424 Prime PSC 01
Request a Quote
  • Home
  • About Us
    • Our Approach
    • Our Mission
    • Our Team
    • Who We Are
    • Press Room
    • Prime Process Safety Career
  • Consulting Services
    • Dust Hazard Analysis (DHA)
    • Ignition Sources Assessment
    • Electrostatic Hazard Assessment
    • Hazardous Area Classification
    • Process Hazard Analysis (PHA)
      • Hazard and Operability Studies (HAZOP)
      • Layer of protection analysis (LOPA)
      • Facilitation and Scribing Personnel
      • What-If and Checklist Reviews
      • Hazard Identification Reviews
      • Root Cause Analysis (RCA)
      • Fault Tree Analysis (FTA)
      • Bow-Tie Analysis
      • Quantitative Risk Assessment (QRA)
      • Consequence Modeling In Chemical Industries
    • Fire and Explosion Hazard Analysis
    • Explosion Prevention and Protection Consulting Services
    • Fire and Building Code Services
    • Process Safety Management (PSM)
    • Process Safety Management (PSM) Gap Analysis
    • Process Safety Management Compliance Review and Audit
    • Hazard Identification and Risk Assessment (HIRA)
    • Preliminary Hazard Asessment
    • Incident investigation
    • Expert Witness and Litigation
    • Facility Siting in Chemical Industry
    • Organizational Competency in Process Safety
  • Testing Services
    • ISO/IEC 17025:2017 Accredited Laboratory
    • Combustible Dust Testing
      • Go/No-Go Explosibility Screening
      • Burning Rate Test
      • Dust Explosion Severity (Kst/Pmax/dP/dt)
      • Minimum Explosible Concentration (MEC) Testing
      • Limiting Oxygen Concentration (LOC) Test
      • Minimum Ignition Energy (MIE) Testing
      • Minimum Autoignition Temperature-Cloud (MAIT - Cloud)
      • Layer Ignition Temperature of Dust (LIT)
      • Particle Sieve Analysis
      • Moisture Content Analysis
      • Cryogenic Grinding
    • Electrostatics Testing
      • Volume Resistivity
      • Surface Resistivity
      • Charge Decay (Relaxation) Time
      • Electrostatic Discharge (ESD) Testing
      • Breakdown Voltage
      • Liquid Conductivity
      • Flexible Intermediate Bulk Containers (FIBC)
      • Electrostatic Chargeability Testing
    • Self-Heating / Thermal Instability Testing
      • Basket Self-Heating
      • Grewer Oven Test
      • Air Over layer/Powder Layer Test
      • Bulk Powder Test
      • Aerated Powder Test
    • Gas & Vapor Flammability Testing
      • Flash Point
      • Flammability Limits (LFL/UFL)
      • Autoignition Temperature (AIT)
      • Limiting Oxygen Concentration (LOC)
      • Explosion Severity (Pmax and Kg)
    • UN / DOT Testing & Classification
      • Water Reactivity Testing – UN Class 4
      • Oxidizing Solids - UN Test O.1
      • Self-Heating Solids – UN Test N.4
      • Readily Combustible Solids or Flammability of Solids (Burning Rate) - UN Test N.1
      • Flammable Liquid (Flashpoint, Fire Point) - UN Class 3
    • Reactive Chemical Testing
      • Differential Scanning Calorimetry (DSC)
      • Differential Thermal Analysis (DTA)
      • Thermogravimetric Analysis (TGA)
      • Accelerating Rate Calorimetry (ARC)
      • Reaction Calorimetry
      • Vent Sizing Package (VSP)
    • Safety Data Sheet (SDS) Creation
      • Flammability Limits
      • Boiling Point
      • Melting Point
      • Vapor Pressure
      • pH
      • Relative Density
      • Apparent Bulk Density
      • Dust Explosibility (Kst, MEC, MIE, etc.)
    • Testing Capabilities
  • Reactive Chemical Services
    • Reactive Chemical Testing Services
      • Differential Scanning Calorimetry (DSC)
      • Differential Thermal Analysis (DTA)
      • Thermogravimetric Analysis (TGA)
      • Accelerating Rate Calorimetry (ARC)
      • Reaction Calorimetry
      • Vent Sizing Package (VSP)
    • Chemical Reaction Hazard Assessment
    • Calorimetric Studies
    • Chemical Compatibility Studies
    • Chemical Instability
    • Chemical Kinetics Evaluation
    • Process Dynamic Simulation
    • Self-Heating Evaluation and Analysis
    • Emergency Relief System Design
    • DIERS Technology for Two-Phase Relief System Design
    • Emergency Relief Effluent Handling System Design
  • Training
    • Private or In-house Training
    • Process Safety Webinars
    • Training Course Registration
    • Process Safety Training Area
      • Combustible Dust Hazard Training
      • Electrostatic Hazard Training
      • Process Hazard Analysis (PHA) training
      • Flammable and Combustible Liquid Hazard training
      • Hazardous Area Classification Training
      • Leadership Development in Process Safety Training
      • Process Safety Training
      • Reactive Chemical Training
      • Hazard and Operability (HAZOP) Training
      • Relief System Design Training
      • Process Safety Mentoring and Support Programs Training
      • Process Safety Competency Development Training
  • Industries We Serve
    • Automotive & Aviation Industries
    • Chemical Industry
    • Coal and Mining Industry
    • Electronics Industry
    • Energy / Power Industry
    • Engineering Industry
    • Equipment Manufacturing
    • Flavor & Fragrance Industry
    • Food & Beverage Industry
    • Government Agencies
    • Legal and Insurance
    • Metals & Machining Industry
    • Personal & Household Products Industry
    • Petrochemical Industry
    • Pharmaceutical Industry
    • Plastics, Resins, and Rubber Industry
    • Pulp & Paper Industry
    • Transportation Industry
    • Wood Industry
  • Resources
    • Cases in the news
    • Press Release
    • Newsletter
    • FAQ
    • Webinars
    • News and Events
    • Videos
  • Codes & Standards
    • ASTM Tests & Standards
    • NFPA Standards and Guidelines
    • OSHA PSM Standards
    • OSHA National Emphasis Program (NEP): Directive-CPL 03-00-008
    • API (American Petroleum Institute) Standards
    • ATEX, EN, and IEC Standards
    • GB Standards (Chinese Standards)
  • Blogs
Menu
Prime Process Safety Center
Request a Quote

Tag Archives: Regulatory Compliance

Home · Regulatory Compliance · Page 2
dischrge
29 May
Consulting Services

The Most Frequently Asked Questions About Electrostatic Discharge Ignition Sources

  • June 17, 2025
  • By author-avatar admin_primeprocesssafety
  • 0 comments
What is electrostatic discharge? An electrostatic ignition source is a discharge resulting from the generation and accumulation of electrostatic charges....

Continue reading

psm img
29 May
Consulting Services

The Most Frequently Asked Questions About Process Safety Management (PSM)

  • June 17, 2025
  • By author-avatar admin_primeprocesssafety
  • 4 comments
What is Process Safety Management (PSM)? PSM is a regulatory framework designed to prevent the release of hazardous chemicals that could...

Continue reading

Cost-Effective Combustible Dust Hazard Analysis (DHA) in Compliance with NFPA 652 banner
24 May
Consulting Services

A Complete Guide to Dust Hazard Analysis (DHA)

  • September 9, 2026
  • By author-avatar admin_primeprocesssafety
  • 0 comments

A practical guide to Dust Hazard Analysis (DHA), covering combustible dust risks, testing, and NFPA-aligned safety practices.

Continue reading

18 May
Consulting Services

Dust Hazard Analysis (DHA) Methodologies

  • February 4, 2026
  • By author-avatar admin_primeprocesssafety
  • 0 comments

Learn about dust hazard analysis methods to manage combustible dust risks and find the right DHA methodology for your facility.

Continue reading

  • 1
  • 2

Sign up for newsletter and updates

This field is for validation purposes and should be left unchanged.

Home
About Us
Our Team
Career
Privacy Policy
Terms & Conditions
Consulting Services
Testing Services
Reactive Chemical Testing
Training
Industries We Serve
Resources
Codes & Standards
Blogs
Contact Us
12925 Cypress North Houston Rd, Cypress, TX 77429
(346) 462-3838
info@primeprocesssafety.com
Copyright 2026 Prime Process Safety Center - All Rights Reserved
  • Home
  • About Us
    • Our Approach
    • Our Mission
    • Our Team
    • Who We Are
    • Press Room
    • Prime Process Safety Career
  • Consulting Services
    • Dust Hazard Analysis (DHA)
    • Ignition Sources Assessment
    • Electrostatic Hazard Assessment
    • Hazardous Area Classification
    • Process Hazard Analysis (PHA)
      • Hazard and Operability Studies (HAZOP)
      • Layer of protection analysis (LOPA)
      • Facilitation and Scribing Personnel
      • What-If and Checklist Reviews
      • Hazard Identification Reviews
      • Root Cause Analysis (RCA)
      • Fault Tree Analysis (FTA)
      • Bow-Tie Analysis
      • Quantitative Risk Assessment (QRA)
      • Consequence Modeling In Chemical Industries
    • Fire and Explosion Hazard Analysis
    • Explosion Prevention and Protection Consulting Services
    • Fire and Building Code Services
    • Process Safety Management (PSM)
    • Process Safety Management (PSM) Gap Analysis
    • Process Safety Management Compliance Review and Audit
    • Hazard Identification and Risk Assessment (HIRA)
    • Preliminary Hazard Asessment
    • Incident investigation
    • Expert Witness and Litigation
    • Facility Siting in Chemical Industry
    • Organizational Competency in Process Safety
  • Testing Services
    • ISO/IEC 17025:2017 Accredited Laboratory
    • Combustible Dust Testing
      • Go/No-Go Explosibility Screening
      • Burning Rate Test
      • Dust Explosion Severity (Kst/Pmax/dP/dt)
      • Minimum Explosible Concentration (MEC) Testing
      • Limiting Oxygen Concentration (LOC) Test
      • Minimum Ignition Energy (MIE) Testing
      • Minimum Autoignition Temperature-Cloud (MAIT – Cloud)
      • Layer Ignition Temperature of Dust (LIT)
      • Particle Sieve Analysis
      • Moisture Content Analysis
      • Cryogenic Grinding
    • Electrostatics Testing
      • Volume Resistivity
      • Surface Resistivity
      • Charge Decay (Relaxation) Time
      • Electrostatic Discharge (ESD) Testing
      • Breakdown Voltage
      • Liquid Conductivity
      • Flexible Intermediate Bulk Containers (FIBC)
      • Electrostatic Chargeability Testing
    • Self-Heating / Thermal Instability Testing
      • Basket Self-Heating
      • Grewer Oven Test
      • Air Over layer/Powder Layer Test
      • Bulk Powder Test
      • Aerated Powder Test
    • Gas & Vapor Flammability Testing
      • Flash Point
      • Flammability Limits (LFL/UFL)
      • Autoignition Temperature (AIT)
      • Limiting Oxygen Concentration (LOC)
      • Explosion Severity (Pmax and Kg)
    • UN / DOT Testing & Classification
      • Water Reactivity Testing – UN Class 4
      • Oxidizing Solids – UN Test O.1
      • Self-Heating Solids – UN Test N.4
      • Readily Combustible Solids or Flammability of Solids (Burning Rate) – UN Test N.1
      • Flammable Liquid (Flashpoint, Fire Point) – UN Class 3
    • Reactive Chemical Testing
      • Differential Scanning Calorimetry (DSC)
      • Differential Thermal Analysis (DTA)
      • Thermogravimetric Analysis (TGA)
      • Accelerating Rate Calorimetry (ARC)
      • Reaction Calorimetry
      • Vent Sizing Package (VSP)
    • Safety Data Sheet (SDS) Creation
      • Flammability Limits
      • Boiling Point
      • Melting Point
      • Vapor Pressure
      • pH
      • Relative Density
      • Apparent Bulk Density
      • Dust Explosibility (Kst, MEC, MIE, etc.)
    • Testing Capabilities
  • Reactive Chemical Services
    • Reactive Chemical Testing Services
      • Differential Scanning Calorimetry (DSC)
      • Differential Thermal Analysis (DTA)
      • Thermogravimetric Analysis (TGA)
      • Accelerating Rate Calorimetry (ARC)
      • Reaction Calorimetry
      • Vent Sizing Package (VSP)
    • Chemical Reaction Hazard Assessment
    • Calorimetric Studies
    • Chemical Compatibility Studies
    • Chemical Instability
    • Chemical Kinetics Evaluation
    • Process Dynamic Simulation
    • Self-Heating Evaluation and Analysis
    • Emergency Relief System Design
    • DIERS Technology for Two-Phase Relief System Design
    • Emergency Relief Effluent Handling System Design
  • Training
    • Private or In-house Training
    • Process Safety Webinars
    • Training Course Registration
    • Process Safety Training Area
      • Combustible Dust Hazard Training
      • Electrostatic Hazard Training
      • Process Hazard Analysis (PHA) training
      • Flammable and Combustible Liquid Hazard training
      • Hazardous Area Classification Training
      • Leadership Development in Process Safety Training
      • Process Safety Training
      • Reactive Chemical Training
      • Hazard and Operability (HAZOP) Training
      • Relief System Design Training
      • Process Safety Mentoring and Support Programs Training
      • Process Safety Competency Development Training
  • Industries We Serve
    • Automotive & Aviation Industries
    • Chemical Industry
    • Coal and Mining Industry
    • Electronics Industry
    • Energy / Power Industry
    • Engineering Industry
    • Equipment Manufacturing
    • Flavor & Fragrance Industry
    • Food & Beverage Industry
    • Government Agencies
    • Legal and Insurance
    • Metals & Machining Industry
    • Personal & Household Products Industry
    • Petrochemical Industry
    • Pharmaceutical Industry
    • Plastics, Resins, and Rubber Industry
    • Pulp & Paper Industry
    • Transportation Industry
    • Wood Industry
  • Resources
    • Cases in the news
    • Press Release
    • Newsletter
    • FAQ
    • Webinars
    • News and Events
    • Videos
  • Codes & Standards
    • ASTM Tests & Standards
    • NFPA Standards and Guidelines
    • OSHA PSM Standards
    • OSHA National Emphasis Program (NEP): Directive-CPL 03-00-008
    • API (American Petroleum Institute) Standards
    • ATEX, EN, and IEC Standards
    • GB Standards (Chinese Standards)
  • Blogs

Want Us to Reach You?