WH US 06102023 51635160424 Prime PSC 01
Request a Quote
  • Home
  • About Us
    • Our Approach
    • Our Mission
    • Our Team
    • Who We Are
    • Press Room
    • Prime Process Safety Career
  • Consulting Services
    • Dust Hazard Analysis (DHA)
    • Ignition Sources Assessment
    • Electrostatic Hazard Assessment
    • Hazardous Area Classification
    • Process Hazard Analysis (PHA)
      • Hazard and Operability Studies (HAZOP)
      • Layer of protection analysis (LOPA)
      • Facilitation and Scribing Personnel
      • What-If and Checklist Reviews
      • Hazard Identification Reviews
      • Root Cause Analysis (RCA)
      • Fault Tree Analysis (FTA)
      • Bow-Tie Analysis
      • Quantitative Risk Assessment (QRA)
      • Consequence Modeling In Chemical Industries
    • Fire and Explosion Hazard Analysis
    • Explosion Prevention and Protection Consulting Services
    • Fire and Building Code Services
    • Process Safety Management (PSM)
    • Process Safety Management (PSM) Gap Analysis
    • Process Safety Management Compliance Review and Audit
    • Hazard Identification and Risk Assessment (HIRA)
    • Preliminary Hazard Asessment
    • Incident investigation
    • Expert Witness and Litigation
    • Facility Siting in Chemical Industry
    • Organizational Competency in Process Safety
  • Testing Services
    • ISO/IEC 17025:2017 Accredited Laboratory
    • Combustible Dust Testing
      • Go/No-Go Explosibility Screening
      • Burning Rate Test
      • Dust Explosion Severity (Kst/Pmax/dP/dt)
      • Minimum Explosible Concentration (MEC) Testing
      • Limiting Oxygen Concentration (LOC) Test
      • Minimum Ignition Energy (MIE) Testing
      • Minimum Autoignition Temperature-Cloud (MAIT - Cloud)
      • Layer Ignition Temperature of Dust (LIT)
      • Particle Sieve Analysis
      • Moisture Content Analysis
      • Cryogenic Grinding
    • Electrostatics Testing
      • Volume Resistivity
      • Surface Resistivity
      • Charge Decay (Relaxation) Time
      • Electrostatic Discharge (ESD) Testing
      • Breakdown Voltage
      • Liquid Conductivity
      • Flexible Intermediate Bulk Containers (FIBC)
      • Electrostatic Chargeability Testing
    • Self-Heating / Thermal Instability Testing
      • Basket Self-Heating
      • Grewer Oven Test
      • Air Over layer/Powder Layer Test
      • Bulk Powder Test
      • Aerated Powder Test
    • Gas & Vapor Flammability Testing
      • Flash Point
      • Flammability Limits (LFL/UFL)
      • Autoignition Temperature (AIT)
      • Limiting Oxygen Concentration (LOC)
      • Explosion Severity (Pmax and Kg)
    • UN / DOT Testing & Classification
      • Water Reactivity Testing – UN Class 4
      • Oxidizing Solids - UN Test O.1
      • Self-Heating Solids – UN Test N.4
      • Readily Combustible Solids or Flammability of Solids (Burning Rate) - UN Test N.1
      • Flammable Liquid (Flashpoint, Fire Point) - UN Class 3
    • Reactive Chemical Testing
      • Differential Scanning Calorimetry (DSC)
      • Differential Thermal Analysis (DTA)
      • Thermogravimetric Analysis (TGA)
      • Accelerating Rate Calorimetry (ARC)
      • Reaction Calorimetry
      • Vent Sizing Package (VSP)
    • Safety Data Sheet (SDS) Creation
      • Flammability Limits
      • Boiling Point
      • Melting Point
      • Vapor Pressure
      • pH
      • Relative Density
      • Apparent Bulk Density
      • Dust Explosibility (Kst, MEC, MIE, etc.)
    • Testing Capabilities
  • Reactive Chemical Services
    • Reactive Chemical Testing Services
      • Differential Scanning Calorimetry (DSC)
      • Differential Thermal Analysis (DTA)
      • Thermogravimetric Analysis (TGA)
      • Accelerating Rate Calorimetry (ARC)
      • Reaction Calorimetry
      • Vent Sizing Package (VSP)
    • Chemical Reaction Hazard Assessment
    • Calorimetric Studies
    • Chemical Compatibility Studies
    • Chemical Instability
    • Chemical Kinetics Evaluation
    • Process Dynamic Simulation
    • Self-Heating Evaluation and Analysis
    • Emergency Relief System Design
    • DIERS Technology for Two-Phase Relief System Design
    • Emergency Relief Effluent Handling System Design
  • Training
    • Private or In-house Training
    • Process Safety Webinars
    • Training Course Registration
    • Process Safety Training Area
      • Combustible Dust Hazard Training
      • Electrostatic Hazard Training
      • Process Hazard Analysis (PHA) training
      • Flammable and Combustible Liquid Hazard training
      • Hazardous Area Classification Training
      • Leadership Development in Process Safety Training
      • Process Safety Training
      • Reactive Chemical Training
      • Hazard and Operability (HAZOP) Training
      • Relief System Design Training
      • Process Safety Mentoring and Support Programs Training
      • Process Safety Competency Development Training
  • Industries We Serve
    • Automotive & Aviation Industries
    • Chemical Industry
    • Coal and Mining Industry
    • Electronics Industry
    • Energy / Power Industry
    • Engineering Industry
    • Equipment Manufacturing
    • Flavor & Fragrance Industry
    • Food & Beverage Industry
    • Government Agencies
    • Legal and Insurance
    • Metals & Machining Industry
    • Personal & Household Products Industry
    • Petrochemical Industry
    • Pharmaceutical Industry
    • Plastics, Resins, and Rubber Industry
    • Pulp & Paper Industry
    • Transportation Industry
    • Wood Industry
  • Resources
    • Cases in the news
    • Press Release
    • Newsletter
    • FAQ
    • Webinars
    • News and Events
    • Videos
  • Codes & Standards
    • ASTM Tests & Standards
    • NFPA Standards and Guidelines
    • OSHA PSM Standards
    • OSHA National Emphasis Program (NEP): Directive-CPL 03-00-008
    • API (American Petroleum Institute) Standards
    • ATEX, EN, and IEC Standards
    • GB Standards (Chinese Standards)
  • Blogs
Menu
Prime Process Safety Center
Request a Quote

Tag Archives: Explosion Prevention

Home · Explosion Prevention · Page 2
22 Apr
Conference

Unlock Innovation and Expertise at North America’s Premier Powder & Bulk Solids Event!

  • July 15, 2025
  • By author-avatar Lily
  • 0 comments
Copyright Powder and Bulk Solids International The International Powder & Bulk Solids Conference & Exhibition, also known as “The Powder Show”,...

Continue reading

WEBINAR: The Need for Combustible Dust Testing and Its Implications on Dust Hazard Analysis Banner
14 Apr
Webinar

WEBINAR: The Need for Combustible Dust Testing and Its Implications on Dust Hazard Analysis

  • July 15, 2025
  • By author-avatar Lily
  • 0 comments
The Need for Combustible Dust Testing and Its Implications on Dust Hazard Analysis Date: Monday, June 9th, 2025 Time: 11:00am (CST) Speaker:...

Continue reading

WEBINAR: Optimize Your DHA: A Cost-Effective Hybrid Strategy Banner
14 Apr
Webinar

WEBINAR: Optimize Your DHA: A Cost-Effective Hybrid Strategy

  • July 15, 2025
  • By author-avatar Lily
  • 0 comments
Optimizing Dust Hazard Analysis (DHA): A Cost-Effective Hybrid Approach Date: Friday, May 23rd, 2025 Time: 11:00am (CST) Speaker: Taylor-Guibing Zhao, PhD, President /...

Continue reading

the silent threat image
10 Apr
Testing Services

The Silent Threat: Unmasking Thermal Instability

  • July 14, 2025
  • By author-avatar admin
  • 0 comments
The Silent Threat: Unmasking Thermal Instability in Powders to Prevent Drying Disasters Why is Drying a High-Risk Operation? The Insidious...

Continue reading

Global Congress on Process Safety
02 Apr
Conference

Mark Your Calendars! Prime Process Safety Center to Present at Spring 25 + 21 GCPS in Dallas

  • June 17, 2025
  • By author-avatar admin
  • 0 comments
Mark Your Calendars! Prime Process Safety Center to Present at Spring 25 + 21 GCPS in Dallas Why is this...

Continue reading

blog 3
23 Aug
Testing Services

UNDERSTANDING ELECTROSTATIC DISCHARGE TESTING

  • August 13, 2025
  • By author-avatar admin_primeprocesssafety
  • 0 comments
Electrostatic testing is a critical process in various industries, particularly those dealing with flammable materials, powders, gases, or sensitive electronic...

Continue reading

Combustible Dust Hazards in Coal Handling Facilities Banner
23 Aug
Consulting Services

Combustible Dust Hazards in Coal Handling Facilities

  • February 13, 2026
  • By author-avatar admin_primeprocesssafety
  • 0 comments

This article covers combustible dust hazards in coal handling facilities and how to prevent explosions and protect workers.

Continue reading

Picture9
24 Jul
Consulting Services

Understanding Vent Sizing: The Essential Differences for Deflagration and Runaway Reactions

  • July 14, 2025
  • By author-avatar admin_primeprocesssafety
  • 0 comments
Introduction Chemical processes in industrial settings come with inherent risks, particularly when dealing with reactive chemicals. Among the critical safety measures...

Continue reading

Combustible Dust Housekeeping Program Banner
24 Jul
Consulting Services

Combustible Dust Cleaning: Requirements, Methods, and Best Practices

  • January 26, 2026
  • By author-avatar admin_primeprocesssafety
  • 0 comments

Learn how combustible dust cleaning reduces explosion risks through housekeeping, safe methods, training, and safety management.

Continue reading

Picture4
09 Jul
Consulting Services

Understanding Hazardous Area Classifications

  • July 14, 2025
  • By author-avatar admin_primeprocesssafety
  • 0 comments
Introduction A Hazardous Area Classification (HAC) study is an essential analysis aimed at reducing the chances of igniting flammable materials. This...

Continue reading

  • 1
  • 2
  • 3

Sign up for newsletter and updates

This field is for validation purposes and should be left unchanged.

Home
About Us
Our Team
Career
Privacy Policy
Terms & Conditions
Consulting Services
Testing Services
Reactive Chemical Testing
Training
Industries We Serve
Resources
Codes & Standards
Blogs
Contact Us
12925 Cypress North Houston Rd, Cypress, TX 77429
(346) 462-3838
(346) 462-3816
info@primeprocesssafety.com
Copyright 2025 Prime Process Safety Center - All Rights Reserved
  • Home
  • About Us
    • Our Approach
    • Our Mission
    • Our Team
    • Who We Are
    • Press Room
    • Prime Process Safety Career
  • Consulting Services
    • Dust Hazard Analysis (DHA)
    • Ignition Sources Assessment
    • Electrostatic Hazard Assessment
    • Hazardous Area Classification
    • Process Hazard Analysis (PHA)
      • Hazard and Operability Studies (HAZOP)
      • Layer of protection analysis (LOPA)
      • Facilitation and Scribing Personnel
      • What-If and Checklist Reviews
      • Hazard Identification Reviews
      • Root Cause Analysis (RCA)
      • Fault Tree Analysis (FTA)
      • Bow-Tie Analysis
      • Quantitative Risk Assessment (QRA)
      • Consequence Modeling In Chemical Industries
    • Fire and Explosion Hazard Analysis
    • Explosion Prevention and Protection Consulting Services
    • Fire and Building Code Services
    • Process Safety Management (PSM)
    • Process Safety Management (PSM) Gap Analysis
    • Process Safety Management Compliance Review and Audit
    • Hazard Identification and Risk Assessment (HIRA)
    • Preliminary Hazard Asessment
    • Incident investigation
    • Expert Witness and Litigation
    • Facility Siting in Chemical Industry
    • Organizational Competency in Process Safety
  • Testing Services
    • ISO/IEC 17025:2017 Accredited Laboratory
    • Combustible Dust Testing
      • Go/No-Go Explosibility Screening
      • Burning Rate Test
      • Dust Explosion Severity (Kst/Pmax/dP/dt)
      • Minimum Explosible Concentration (MEC) Testing
      • Limiting Oxygen Concentration (LOC) Test
      • Minimum Ignition Energy (MIE) Testing
      • Minimum Autoignition Temperature-Cloud (MAIT – Cloud)
      • Layer Ignition Temperature of Dust (LIT)
      • Particle Sieve Analysis
      • Moisture Content Analysis
      • Cryogenic Grinding
    • Electrostatics Testing
      • Volume Resistivity
      • Surface Resistivity
      • Charge Decay (Relaxation) Time
      • Electrostatic Discharge (ESD) Testing
      • Breakdown Voltage
      • Liquid Conductivity
      • Flexible Intermediate Bulk Containers (FIBC)
      • Electrostatic Chargeability Testing
    • Self-Heating / Thermal Instability Testing
      • Basket Self-Heating
      • Grewer Oven Test
      • Air Over layer/Powder Layer Test
      • Bulk Powder Test
      • Aerated Powder Test
    • Gas & Vapor Flammability Testing
      • Flash Point
      • Flammability Limits (LFL/UFL)
      • Autoignition Temperature (AIT)
      • Limiting Oxygen Concentration (LOC)
      • Explosion Severity (Pmax and Kg)
    • UN / DOT Testing & Classification
      • Water Reactivity Testing – UN Class 4
      • Oxidizing Solids – UN Test O.1
      • Self-Heating Solids – UN Test N.4
      • Readily Combustible Solids or Flammability of Solids (Burning Rate) – UN Test N.1
      • Flammable Liquid (Flashpoint, Fire Point) – UN Class 3
    • Reactive Chemical Testing
      • Differential Scanning Calorimetry (DSC)
      • Differential Thermal Analysis (DTA)
      • Thermogravimetric Analysis (TGA)
      • Accelerating Rate Calorimetry (ARC)
      • Reaction Calorimetry
      • Vent Sizing Package (VSP)
    • Safety Data Sheet (SDS) Creation
      • Flammability Limits
      • Boiling Point
      • Melting Point
      • Vapor Pressure
      • pH
      • Relative Density
      • Apparent Bulk Density
      • Dust Explosibility (Kst, MEC, MIE, etc.)
    • Testing Capabilities
  • Reactive Chemical Services
    • Reactive Chemical Testing Services
      • Differential Scanning Calorimetry (DSC)
      • Differential Thermal Analysis (DTA)
      • Thermogravimetric Analysis (TGA)
      • Accelerating Rate Calorimetry (ARC)
      • Reaction Calorimetry
      • Vent Sizing Package (VSP)
    • Chemical Reaction Hazard Assessment
    • Calorimetric Studies
    • Chemical Compatibility Studies
    • Chemical Instability
    • Chemical Kinetics Evaluation
    • Process Dynamic Simulation
    • Self-Heating Evaluation and Analysis
    • Emergency Relief System Design
    • DIERS Technology for Two-Phase Relief System Design
    • Emergency Relief Effluent Handling System Design
  • Training
    • Private or In-house Training
    • Process Safety Webinars
    • Training Course Registration
    • Process Safety Training Area
      • Combustible Dust Hazard Training
      • Electrostatic Hazard Training
      • Process Hazard Analysis (PHA) training
      • Flammable and Combustible Liquid Hazard training
      • Hazardous Area Classification Training
      • Leadership Development in Process Safety Training
      • Process Safety Training
      • Reactive Chemical Training
      • Hazard and Operability (HAZOP) Training
      • Relief System Design Training
      • Process Safety Mentoring and Support Programs Training
      • Process Safety Competency Development Training
  • Industries We Serve
    • Automotive & Aviation Industries
    • Chemical Industry
    • Coal and Mining Industry
    • Electronics Industry
    • Energy / Power Industry
    • Engineering Industry
    • Equipment Manufacturing
    • Flavor & Fragrance Industry
    • Food & Beverage Industry
    • Government Agencies
    • Legal and Insurance
    • Metals & Machining Industry
    • Personal & Household Products Industry
    • Petrochemical Industry
    • Pharmaceutical Industry
    • Plastics, Resins, and Rubber Industry
    • Pulp & Paper Industry
    • Transportation Industry
    • Wood Industry
  • Resources
    • Cases in the news
    • Press Release
    • Newsletter
    • FAQ
    • Webinars
    • News and Events
    • Videos
  • Codes & Standards
    • ASTM Tests & Standards
    • NFPA Standards and Guidelines
    • OSHA PSM Standards
    • OSHA National Emphasis Program (NEP): Directive-CPL 03-00-008
    • API (American Petroleum Institute) Standards
    • ATEX, EN, and IEC Standards
    • GB Standards (Chinese Standards)
  • Blogs

Want Us to Reach You?